What are the difficulties in using adhesive for manual application of PVC film? Fushen PVC Adhesive GW-6568 offers professional solutions
In the processing of wood products, manual bonding of PVC film (including PVC edge banding, PVC wood veneer, etc.) to wood is a common process. However, ordinary adhesives often encounter problems such as "non-compliance with environmental protection standards", "weak adhesion", and "poor penetration", making it difficult to meet processing requirements. In response to this pain point, Fushen PVC Adhesive GW-6568, as a high-performance product specially designed for bonding PVC materials, has completely solved the problem of adhesive usage.
The core adhesive problem of manual application of PVC film has been fully overcome by GW-6568
In the traditional manual application process of PVC film, three core problems are often encountered in the glue application stage. However, Fushen GW-6568 provides targeted solutions:
① Failure to meet environmental protection standards and export restrictions: Ordinary adhesives often contain organic solvents such as toluene and formaldehyde, which do not meet international environmental protection standards, making it difficult for the products to enter the European and American markets. GW-6568 does not contain such harmful components and complies with international environmental protection requirements such as RoHS and REACH, easily meeting export demands.
② Weak adhesion and easy peeling: The surface of PVC wood veneer and high-density board is smooth and difficult to penetrate. Ordinary white latex glue, due to poor penetration and insufficient adhesion, is prone to peeling and lifting after bonding. GW-6568 has optimized its formula for this material characteristic, which can achieve high-strength and effective bonding, ensuring a firm bond.
③ Narrow application scenarios and poor universality: Some adhesives can only bond a single type of PVC and cannot meet the needs of multiple scenarios. GW-6568 has a wide range of applications and can be used for manually attaching PVC edge banding, leather, and wood veneer. It can also meet the requirements of cold-pressed PVC boards, carbon fiber boards, and other scenarios, providing a one-stop solution for various bonding needs.
Ii. Core advantages of Fushen PVC Adhesive GW-6568: Environmentally friendly, highly effective, and easy to use
In addition to solving the core problems, GW-6568 also performs outstandingly in terms of environmental friendliness, bonding effect and operational convenience, comprehensively enhancing processing efficiency and quality
1. Environmental friendliness: Odorless and safe, meeting international standards
The product adopts an eco-friendly formula and does not contain organic solvents such as toluene and formaldehyde. It has no pungent odor when in use, which not only ensures the health and safety of production workers but also complies with international environmental protection standards such as RoHS and REACH. Whether for domestic sales or export to the European and American markets, it can meet environmental protection requirements and avoid order risks caused by environmental protection issues.
2. Bonding effect: High-strength adhesion, suitable for special materials
In view of the smooth surface and difficult penetration characteristics of PVC materials (especially PVC wood veneer and high-density boards), GW-6568 has optimized the bonding formula, solving the shortcomings of ordinary white latex glue such as "poor penetration and weak adhesion"
It can penetrate the surface layer of the material to form a stable bond, avoiding peeling and warping after bonding.
Even in special scenarios such as cold-pressed PVC boards and carbon fiber boards, it can maintain strong bonding performance, ensuring the durability of the processed products.
3. Operability: Easy to get started in 6 steps without the need for complex equipment
Unlike some adhesives that require professional equipment assistance, the operation process of GW-6568 is simple and easy to master, and can be completed manually, significantly lowering the processing threshold. The specific steps are as follows:
Material preparation: Ensure that the surface of the base material is clean and free of impurities. Use a high-quality roller to evenly apply adhesive on one side of the base material or PVC film.
Direct veneering: Directly cover the coated substrate with PVC film (or wood veneer) without heating with an electric iron, simplifying the operation.
Cutting treatment: After the bonding and splicing, cut first to avoid bubbling caused by subsequent processing.
Seamless splicing: If cracks appear at the splicing point, they can be eliminated by gently pushing with sandpaper to achieve a seamless effect.
Standing and curing: After bonding, it is necessary to wait for more than 2 hours to ensure that the glue is fully cured before proceeding to the next process.
After standing still and meeting the standards, the manual application process of the PVC film is completed, and subsequent processing can be carried out.
Iii. Brand Endorsement: Focusing on woodworking adhesives, quality guaranteed
Fushen PVC adhesive GW-6568 is from the "Fushen Woodworking Adhesive" brand under Guangdong Fushen Chemical Co., LTD. This brand was founded in 2005 and has been dedicated to the research and development, production and sales of woodworking adhesives for many years. Its product line covers water-based environmentally friendly single-component adhesives, high-performance wood veneer adhesives, panel gluing adhesives, assembly adhesives, and pressing adhesives, etc. With its professional strength, it is hailed as "China's wood veneer adhesive Expert". It has always adhered to the concept of "combining environmental protection with performance", providing reliable adhesive support for wood product processing enterprises to ensure a dual improvement in product quality and production efficiency.