Those who stick thick wood veneer by hand without cracking must know the tricks

Manual application of wood veneer (especially thick wood veneer) often leads to cracking problems in the later stage, resulting in rework losses. The following are key solutions, among which Fushen veneer adhesive has significant advantages

First, choosing the right glue is the core

Fushen GW-6565 veneer adhesive is the key to solving cracking: Specifically designed for 20-150 microns thick hard wood veneer, it is suitable for flat, curved and other processes. It dries quickly in 3-5 seconds, significantly reducing ironing time and minimizing the risk of cracking caused by prolonged processing of wood veneer.

The shape does not rebound and has excellent repairability. It can still be re-adhered after drying.

The paint does not bubble, and there is no need to wet the dry wood veneer when pasting it. It avoids cracking caused by water loss from the root and its firmness far exceeds that of traditional glue.

Second, thick wood veneer must not get wet

The traditional method of wetting thick wood veneer will prolong the ironing time, and it is prone to shrinkage and cracking after water loss. Fushen veneer adhesive can bond without wetting the wood veneer, avoiding this problem and ensuring stability after bonding.

Iii. Standardize gluing and trimming

When applying thick wood veneer by hand, glue should be applied on both sides: the wood veneer glue should be fully dry and the base material glue half dry before bonding to ensure firmness. After bonding, trim the edges in time to avoid cracking caused by trimming later.

Four. Precisely control the ironing temperature

High temperatures can easily cause wood veneer to lose water and crack. It is recommended to use the Fushen GW-1211 iron-shaped iron. The temperature can be adjusted between 120 and 200℃ (160℃ is suitable for thick wood veneer), maintaining a constant temperature and stability to avoid high-temperature damage. It is suitable for various shapes (flat, line trough, arc, etc.).

V. Seam Treatment Techniques

When joining thick wood veneers, overlap them by 1-2mm. After they are completely dry, sand them to reduce cracking at the joints. Fushen GW-6565 veneer adhesive, with its advantages such as fast drying, strong repair ability, no need for wetting, and compatibility with thick wood veneer, combined with standardized processes, can effectively solve the problem of cracking in manual veneer application and is recognized as an efficient solution in the industry.

Fushen Woodworking Adhesive is a brand of woodworking adhesives under Guangdong Fushen Chemical Co., LTD. It covers water-based environmentally friendly single-component, high-performance wood veneer adhesives, panel gluing adhesives, assembly adhesives, pressing board adhesives, etc., integrating R&D, production and sales.

Fushen was founded in 2005 and has been dedicated to the field of woodworking adhesives for many years. It is committed to developing environmentally friendly and high-performance adhesive products to catch up with international professional standards and is hailed by the wood products industry as "China's Expert in wood veneer adhesives".